Question #104019 “I can able to scan but not print” : Questions : HPLIP

Revision history for this message

sunny (mobilestown) said on 2010-03-15:

#1

Anyone can able to come forward to help

Revision history for this message

Mubeen Jukaku (mubeen-jukaku) said on 2010-03-16:

#2

Please post the result for "hp-check -t"

Revision history for this message

sunny (mobilestown) said on 2010-03-16:

#3

Thank you for your reply. Here is the log:
HP Linux Imaging and Printing System (ver. 3.9.8)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux sunny-laptop 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 i686 GNU/Linux

Distribution:
ubuntu 9.10

Checking Python version...
OK, version 2.6.4 installed

Checking PyQt 4.x version...
OK, version 4.6 installed.

Checking for CUPS...
Status: scheduler is running
error: Version: (Not available. CUPS may not be installed or not running.)

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
To install this dependency, execute this command:
sudo aptitude install --assume-yes cupsddk cupsddk-drivers

Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libcupsys2-dev cupsys-bsd

Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libcupsimage2-dev

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libdbus-1-dev

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes openssl

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsnmp-dev

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libtool

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libusb-dev

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes python-dev

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsane-dev

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.8 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.8

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.8.36
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
working_dir = /home/sunny/Documents
printer_name = Officejet_Pro_L7700
device_uri = "hp:/net/Officejet_Pro_L7700?ip=192.168.0.3"

[commands]
scan_int = False
fax = hp-sendfax -d %FAX_URI%
scan = xsane -V %SANE_URI%
prnt = hp-print -p%PRINTER%
pcard_int = True
prnt_int = True
pcard = hp-unload -d %DEVICE_URI%
cpy = hp-makecopies -d %DEVICE_URI%
fax_int = True
cpy_int = True

[installation]
date_time = 16/03/10 18:56:47
version = 3.9.8.36

[settings]
systray_messages = 0
systray_visible = 0

[alerts]
email_from_address =
email_alerts = False
email_to_addresses =

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 0

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Officejet_Pro_L7700
-------------------
Type: Printer
Device URI: hp:/net/Officejet_Pro_L7700?ip=192.168.0.3
PPD: /etc/cups/ppd/Officejet_Pro_L7700.ppd
PPD Description: HP Officejet Pro l7700 hpijs, 3.9.8
Printer status: printer Officejet_Pro_L7700 is idle. enabled since Mon 08 Mar 2010 16:02:52 GMT
Communication status: Good

Officejet_Pro_L7700_fax
-----------------------
Type: Fax
Device URI: hpfax:/net/Officejet_Pro_L7700?ip=192.168.0.3
PPD: /etc/cups/ppd/Officejet_Pro_L7700_fax.ppd
PPD Description: HP Fax hpijs
Printer status: printer Officejet_Pro_L7700_fax is idle. enabled since Thu 18 Feb 2010 00:18:41 GMT
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `hpaio:/net/Officejet_Pro_L7700?ip=192.168.0.3' is a Hewlett-Packard Officejet_Pro_L7700 all-in-one

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

---------------
| USER GROUPS |
---------------

sunny adm dialout cdrom floppy audio dip video plugdev fuse lpadmin admin

-----------
| SUMMARY |
-----------

error: 11 errors and/or warnings.

Summary of needed commands to run to satisfy missing dependencies:
sudo aptitude install --assume-yes cupsddk cupsddk-drivers
sudo aptitude install --assume-yes libcupsys2-dev cupsys-bsd
sudo aptitude install --assume-yes libcupsimage2-dev
sudo aptitude install --assume-yes libdbus-1-dev
sudo aptitude install --assume-yes openssl
sudo aptitude install --assume-yes libsnmp-dev
sudo aptitude install --assume-yes libtool
sudo aptitude install --assume-yes libusb-dev
sudo aptitude install --assume-yes python-dev
sudo aptitude install --assume-yes libsane-dev

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Thank you for your reply. Here is the log:
HP Linux Imaging and Printing System (ver. 3.9.8)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------