Ubuntu

Ubuntu 7.10 installation cannot see external hard drive.

Asked by Jim Edwards on 2008-01-20

Computer with transferred fixed hard drive cannot see my USB external hard drive where all data was backed up to with previous machine. External hard drive was originally configured as FAT32 when I still had windows XP installed (Only Ubuntu now). Previous machine which donated the fixed hard drive worked fine with this External hard drive. Any suggestions?

Question information

Language:: English Edit question

Status:: Solved

For:: Ubuntu Edit question

Assignee:: No assignee Edit question

Solved by:: naufal

Solved:: 2008-01-23

Last query:: 2008-01-23

Last reply:: 2008-01-23

Link existing bug

Revision history for this message

naufal (musp-student) said on 2008-01-20:

hello,
can you post 'dmesg' result here?
type 'dmesg' in terminal....

Revision history for this message

Jim Edwards (jim-edwards) said on 2008-01-20:

Hello Naufal As requested:
jim@jim-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fbc70
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FAB70 checksum 0
[ 0.000000] ACPI: RSDP 000FAB70, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 AMIINT SiS740XX 1000 MSFT 100000B)
[ 0.000000] ACPI: FACP 1FFF0030, 0081 (r1 AMIINT SiS740XX 11 MSFT 100000B)
[ 0.000000] ACPI: DSDT 1FFF0120, 32B4 (r1 SiS 746 100 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFF00C0, 005A (r1 AMIINT SiS740XX 1000 MSFT 100000B)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Built 1 zonelists. Total pages: 130033
[ 0.000000] Kernel command line: root=UUID=a7625bcb-792e-4970-a111-336d5fea082e ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2170.979 MHz processor.
[ 28.707893] Console: colour VGA+ 80x25
[ 28.708281] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.708550] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 28.723245] Memory: 508172k/524224k available (2015k kernel code, 15428k reserved, 916k data, 364k init, 0k highmem)
[ 28.723255] virtual kernel memory layout:
[ 28.723256] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 28.723257] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.723258] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 28.723259] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 28.723261] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 28.723262] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 28.723263] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 28.723267] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 28.723312] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 28.803218] Calibrating delay using timer specific routine.. 4344.11 BogoMIPS (lpj=8688224)
[ 28.803251] Security Framework v1.0.0 initialized
[ 28.803259] SELinux: Disabled at boot.
[ 28.803276] Mount-cache hash table entries: 512
[ 28.803422] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 28.803431] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.803434] CPU: L2 Cache: 512K (64 bytes/line)
[ 28.803437] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 28.803449] Compat vDSO mapped to ffffe000.
[ 28.803462] Checking 'hlt' instruction... OK.
[ 28.819336] SMP alternatives: switching to UP code
[ 28.819594] Freeing SMP alternatives: 11k freed
[ 28.819922] Early unpacking initramfs... done
[ 29.112822] ACPI: Core revision 20070126
[ 29.112923] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 29.114188] CPU0: AMD Athlon(tm) XP 3000+ stepping 00
[ 29.114211] Total of 1 processors activated (4344.11 BogoMIPS).
[ 29.114312] ENABLING IO-APIC IRQs
[ 29.114489] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 29.258656] Brought up 1 CPUs
[ 29.258809] Booting paravirtualized kernel on bare hardware
[ 29.258882] Time: 17:34:11 Date: 00/20/108
[ 29.258914] NET: Registered protocol family 16
[ 29.259033] EISA bus registered
[ 29.259046] ACPI: bus type pci registered
[ 29.260083] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
[ 29.260086] PCI: Using configuration type 1
[ 29.260088] Setting up standard PCI resources
[ 29.261588] ACPI: EC: Look up EC in DSDT
[ 29.264217] ACPI: Interpreter enabled
[ 29.264220] ACPI: (supports S0 S1 S4 S5)
[ 29.264233] ACPI: Using IOAPIC for interrupt routing
[ 29.267949] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.267958] PCI: Probing PCI hardware (bus 00)
[ 29.268120] Enabling SiS 96x SMBus.
[ 29.268623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.276464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.276545] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.276625] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 29.276728] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.276807] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.276905] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 29.276997] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.277078] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 29.277163] ACPI: Power Resource [URP1] (off)
[ 29.277186] ACPI: Power Resource [URP2] (off)
[ 29.277207] ACPI: Power Resource [FDDP] (off)
[ 29.277229] ACPI: Power Resource [LPTP] (off)
[ 29.277237] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.277248] pnp: PnP ACPI init
[ 29.277255] ACPI: bus type pnp registered
[ 29.279492] pnp: PnP ACPI: found 12 devices
[ 29.279495] ACPI: ACPI bus type pnp unregistered
[ 29.279499] PnPBIOS: Disabled by ACPI PNP
[ 29.279556] PCI: Using ACPI for IRQ routing
[ 29.279559] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.282465] NET: Registered protocol family 8
[ 29.282467] NET: Registered protocol family 20
[ 29.282543] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 29.282568] Time: tsc clocksource has been installed.
[ 29.312806] PCI: Bridge: 0000:00:01.0
[ 29.312808] IO window: disabled.
[ 29.312814] MEM window: cdd00000-cfefffff
[ 29.312819] PREFETCH window: bda00000-cdbfffff
[ 29.312840] NET: Registered protocol family 2
[ 29.350543] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 29.350617] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 29.350944] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 29.351177] TCP: Hash tables configured (established 16384 bind 16384)
[ 29.351180] TCP reno registered
[ 29.362583] checking if image is initramfs... it is
[ 29.813849] Switched to high resolution mode on CPU 0
[ 29.913530] Freeing initrd memory: 7059k freed
[ 29.914033] audit: initializing netlink socket (disabled)
[ 29.914050] audit(1200850450.956:1): initialized
[ 29.915829] VFS: Disk quotas dquot_6.5.1
[ 29.915876] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 29.915973] io scheduler noop registered
[ 29.915976] io scheduler anticipatory registered
[ 29.915978] io scheduler deadline registered
[ 29.915991] io scheduler cfq registered (default)
[ 29.916034] Boot video device is 0000:01:00.0
[ 29.916187] isapnp: Scanning for PnP cards...
[ 30.269065] isapnp: No Plug & Play device found
[ 30.292843] Real Time Clock Driver v1.12ac
[ 30.292944] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 30.293039] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.293690] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.294451] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 30.294690] input: Macintosh mouse button emulation as /class/input/input0
[ 30.294768] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 30.295051] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 30.295056] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 30.295214] mice: PS/2 mouse device common for all mice
[ 30.295328] EISA: Probing bus 0 at eisa.0
[ 30.295364] EISA: Detected 0 cards.
[ 30.295563] TCP cubic registered
[ 30.295574] NET: Registered protocol family 1
[ 30.295594] Using IPI No-Shortcut mode
[ 30.295756] Magic number: 8:304:593
[ 30.296478] Freeing unused kernel memory: 364k freed
[ 30.372054] input: AT Translated Set 2 keyboard as /class/input/input1
[ 31.486551] AppArmor: AppArmor initialized<5>audit(1200850452.456:2): type=1505 info="AppArmor initialized" pid=1178
[ 31.494859] fuse init (API version 7.8)
[ 31.499571] Failure registering capabilities with primary security module.
[ 32.063332] SCSI subsystem initialized
[ 32.067935] libata version 2.21 loaded.
[ 32.070390] pata_sis 0000:00:02.5: version 0.5.1
[ 32.070618] scsi0 : pata_sis
[ 32.070673] scsi1 : pata_sis
[ 32.070803] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14
[ 32.070806] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
[ 32.086243] usbcore: registered new interface driver usbfs
[ 32.086275] usbcore: registered new interface driver hub
[ 32.086299] usbcore: registered new device driver usb
[ 32.134395] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 32.194930] sis900.c: v1.08.10 Apr. 2 2006
[ 32.235722] ata1.00: Host Protected Area detected:
[ 32.235725] current size: 385394048 sectors
[ 32.235726] native size: 390721968 sectors
[ 32.237568] ata1.00: native size increased to 390721968 sectors
[ 32.237574] ata1.00: ATA-6: WDC WD2000BB-00GUA0, 08.02D08, max UDMA/100
[ 32.237577] ata1.00: 390721968 sectors, multi 16: LBA48
[ 32.237589] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 32.251712] ata1.00: configured for UDMA/33
[ 32.276031] Floppy drive(s): fd0 is 1.44M
[ 32.293799] FDC 0 is a post-1991 82077
[ 32.733625] ata2.00: ATAPI: ATAPI DVD RW 8XMax, 130D, max UDMA/33
[ 32.733633] ata2.01: ATAPI: CREATIVE DVD-ROM DVD1243E, IC01, max UDMA/33
[ 32.905364] ata2.00: configured for UDMA/33
[ 33.077106] ata2.01: configured for UDMA/33
[ 33.077248] scsi 0:0:0:0: Direct-Access ATA WDC WD2000BB-00G 08.0 PQ: 0 ANSI: 5
[ 33.078166] scsi 1:0:0:0: CD-ROM ATAPI DVD RW 8XMax 130D PQ: 0 ANSI: 5
[ 33.078727] scsi 1:0:1:0: CD-ROM CREATIVE DVD-ROM DVD1243E IC01 PQ: 0 ANSI: 5
[ 33.079102] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 33.079117] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 33.079425] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 33.079445] ohci_hcd 0000:00:03.0: irq 16, io mem 0xcfffd000
[ 33.098125] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 33.098168] sd 0:0:0:0: [sda] Write Protect is off
[ 33.098170] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.098196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.098272] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 33.098281] sd 0:0:0:0: [sda] Write Protect is off
[ 33.098284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.098298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.098303] sda: sda1 sda2 <<6>usb usb1: configuration #1 chosen from 1 choice
[ 33.135001] hub 1-0:1.0: USB hub found
[ 33.135017] hub 1-0:1.0: 3 ports detected
[ 33.138694] sda5 >
[ 33.139196] sd 0:0:0:0: [sda] Attached SCSI disk
[ 33.143187] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.143212] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 33.143232] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 33.169754] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 33.169761] Uniform CD-ROM driver Revision: 3.20
[ 33.170074] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 33.173294] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 33.173448] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 33.236834] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 33.236858] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 33.236896] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 33.236916] ohci_hcd 0000:00:03.1: irq 17, io mem 0xcfffe000
[ 33.294706] usb usb2: configuration #1 chosen from 1 choice
[ 33.294740] hub 2-0:1.0: USB hub found
[ 33.294751] hub 2-0:1.0: 3 ports detected
[ 33.393975] Attempting manual resume
[ 33.393980] swsusp: Resume From Partition 8:5
[ 33.393982] PM: Checking swsusp image.
[ 33.394268] PM: Resume from disk failed.
[ 33.396762] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 33.447617] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[cfffb800-cfffbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 33.451747] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 19
[ 33.451758] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 33.451787] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 33.451831] PCI: cache line size of 64 is not supported by device 0000:00:03.2
[ 33.451838] ehci_hcd 0000:00:03.2: irq 19, io mem 0xcffff000
[ 33.451847] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 33.451945] usb usb3: configuration #1 chosen from 1 choice
[ 33.451975] hub 3-0:1.0: USB hub found
[ 33.451986] hub 3-0:1.0: 6 ports detected
[ 33.527559] kjournald starting. Commit interval 5 seconds
[ 33.527573] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.552453] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 33.553329] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 33.562064] 0000:00:04.0: Using transceiver found at address 1 as default
[ 33.562697] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 18, 00:0b:6a:3b:a5:04.
[ 33.971580] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 34.103956] usb 3-2: configuration #1 chosen from 1 choice
[ 34.104127] hub 3-2:1.0: USB hub found
[ 34.104218] hub 3-2:1.0: 4 ports detected
[ 34.447965] usb 3-4: new high speed USB device using ehci_hcd and address 3
[ 34.682604] usb 3-4: configuration #1 chosen from 1 choice
[ 34.718595] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d01000195b9]
[ 34.882395] usb 3-2.3: new high speed USB device using ehci_hcd and address 4
[ 34.975119] usb 3-2.3: configuration #1 chosen from 1 choice
[ 35.173943] usb 3-2.4: new high speed USB device using ehci_hcd and address 5
[ 35.266876] usb 3-2.4: configuration #1 chosen from 1 choice
[ 41.813126] NET: Registered protocol family 17
[ 41.971630] Linux agpgart interface v0.102 (c) Dave Jones
[ 41.973401] agpgart: Detected SiS chipset - id:1862
[ 41.977818] agpgart: AGP aperture is 64M @ 0xd0000000
[ 41.991709] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.994379] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.252052] eth1: Media Link On 100mbps full-duplex
[ 42.310422] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 42.645652] nvidia: module license 'NVIDIA' taints kernel.
[ 42.977106] input: PC Speaker as /class/input/input2
[ 42.977246] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 42.977724] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 43.376415] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 43.379550] parport_pc 00:0a: reported by Plug and Play ACPI
[ 43.379644] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 43.568258] usbcore: registered new interface driver libusual
[ 43.600036] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 43.600044] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 43.613723] Initializing USB Mass Storage driver...
[ 43.613836] scsi2 : SCSI emulation for USB Mass Storage devices
[ 43.613910] usb-storage: device found at 3
[ 43.613912] usb-storage: waiting for device to settle before scanning
[ 43.613965] scsi3 : SCSI emulation for USB Mass Storage devices
[ 43.614020] usb-storage: device found at 4
[ 43.614022] usb-storage: waiting for device to settle before scanning
[ 43.614037] usbcore: registered new interface driver usb-storage
[ 43.614040] USB Mass Storage support registered.
[ 43.690938] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D11
[ 43.690957] usbcore: registered new interface driver usblp
[ 43.690961] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 43.915924] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21
[ 44.236243] intel8x0_measure_ac97_clock: measured 55422 usecs
[ 44.236247] intel8x0: clocking to 48000
[ 44.973484] lp0: using parport0 (interrupt-driven).
[ 45.016898] Adding 2265124k swap on /dev/sda5. Priority:-1 extents:1 across:2265124k
[ 45.267243] EXT3 FS on sda1, internal journal
[ 45.688702] NET: Registered protocol family 10
[ 45.688823] lo: Disabled Privacy Extensions
[ 46.615215] No dock devices found.
[ 46.684745] input: Power Button (FF) as /class/input/input4
[ 46.689679] ACPI: Power Button (FF) [PWRF]
[ 46.727548] input: Power Button (CM) as /class/input/input5
[ 46.732444] ACPI: Power Button (CM) [PWRB]
[ 48.128710] ppdev: user-space parallel port driver
[ 48.465056] audit(1200850470.382:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4782 profile="/usr/sbin/cupsd"
[ 48.606214] usb-storage: device scan complete
[ 48.606333] usb-storage: device scan complete
[ 48.606798] scsi 3:0:0:0: Direct-Access HP 1.00 PQ: 0 ANSI: 5
[ 48.608398] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 48.608447] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 48.641915] scsi 2:0:0:0: Direct-Access SAMSUNG HD400LD WQ10 PQ: 0 ANSI: 0
[ 48.672150] sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[ 48.673181] sd 2:0:0:0: [sdc] Write Protect is off
[ 48.673183] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 48.673186] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 48.677825] sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[ 48.678671] sd 2:0:0:0: [sdc] Write Protect is off
[ 48.678674] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 48.678676] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 48.678682] sdc:<6>apm: BIOS not found.
[ 49.058211] Failure registering capabilities with primary security module.
[ 49.370793] Bluetooth: Core ver 2.11
[ 49.371138] NET: Registered protocol family 31
[ 49.371142] Bluetooth: HCI device and connection manager initialized
[ 49.371146] Bluetooth: HCI socket layer initialized
[ 49.503257] Bluetooth: L2CAP ver 2.8
[ 49.503263] Bluetooth: L2CAP socket layer initialized
[ 49.619067] Bluetooth: RFCOMM socket layer initialized
[ 49.619372] Bluetooth: RFCOMM TTY layer initialized
[ 49.619375] Bluetooth: RFCOMM ver 1.8
[ 53.039823] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 53.039842] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 53.039913] agpgart: SiS delay workaround: giving bridge time to recover.
[ 53.053511] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 55.894656] eth1: no IPv6 routers present
[ 56.187089] sdc1
[ 56.187191] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 56.187248] sd 2:0:0:0: Attached scsi generic sg4 type 0
jim@jim-desktop:~$

Hello Naufal  As requested:
jim@jim-desktop:~$ dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fbc70
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FAB70 checksum 0
[    0.000000] ACPI: RSDP 000FAB70, 0014 (r0 AMI   )
[    0.000000] ACPI: RSDT 1FFF0000, 002C (r1 AMIINT SiS740XX     1000 MSFT  100000B)
[    0.000000] ACPI: FACP 1FFF0030, 0081 (r1 AMIINT SiS740XX       11 MSFT  100000B)
[    0.000000] ACPI: DSDT 1FFF0120, 32B4 (r1    SiS      746      100 MSFT  100000D)
[    0.000000] ACPI: FACS 1FFF8000, 0040
[    0.000000] ACPI: APIC 1FFF00C0, 005A (r1 AMIINT SiS740XX     1000 MSFT  100000B)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:10 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[    0.000000] Built 1 zonelists.  Total pages: 130033
[    0.000000] Kernel command line: root=UUID=a7625bcb-792e-4970-a111-336d5fea082e ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 2170.979 MHz processor.
[   28.707893] Console: colour VGA+ 80x25
[   28.708281] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   28.708550] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   28.723245] Memory: 508172k/524224k available (2015k kernel code, 15428k reserved, 916k data, 364k init, 0k highmem)
[   28.723255] virtual kernel memory layout:
[   28.723256]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   28.723257]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   28.723258]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   28.723259]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   28.723261]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   28.723262]       .data : 0xc02f7de6 - 0xc03dce84   ( 916 kB)
[   28.723263]       .text : 0xc0100000 - 0xc02f7de6   (2015 kB)
[   28.723267] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   28.723312] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   28.803218] Calibrating delay using timer specific routine.. 4344.11 BogoMIPS (lpj=8688224)
[   28.803251] Security Framework v1.0.0 initialized
[   28.803259] SELinux:  Disabled at boot.
[   28.803276] Mount-cache hash table entries: 512
[   28.803422] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[   28.803431] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   28.803434] CPU: L2 Cache: 512K (64 bytes/line)
[   28.803437] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[   28.803449] Compat vDSO mapped to ffffe000.
[   28.803462] Checking 'hlt' instruction... OK.
[   28.819336] SMP alternatives: switching to UP code
[   28.819594] Freeing SMP alternatives: 11k freed
[   28.819922] Early unpacking initramfs... done
[   29.112822] ACPI: Core revision 20070126
[   29.112923] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   29.114188] CPU0: AMD Athlon(tm) XP 3000+ stepping 00
[   29.114211] Total of 1 processors activated (4344.11 BogoMIPS).
[   29.114312] ENABLING IO-APIC IRQs
[   29.114489] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   29.258656] Brought up 1 CPUs
[   29.258809] Booting paravirtualized kernel on bare hardware
[   29.258882] Time: 17:34:11  Date: 00/20/108
[   29.258914] NET: Registered protocol family 16
[   29.259033] EISA bus registered
[   29.259046] ACPI: bus type pci registered
[   29.260083] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
[   29.260086] PCI: Using configuration type 1
[   29.260088] Setting up standard PCI resources
[   29.261588] ACPI: EC: Look up EC in DSDT
[   29.264217] ACPI: Interpreter enabled
[   29.264220] ACPI: (supports S0 S1 S4 S5)
[   29.264233] ACPI: Using IOAPIC for interrupt routing
[   29.267949] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.267958] PCI: Probing PCI hardware (bus 00)
[   29.268120] Enabling SiS 96x SMBus.
[   29.268623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.276464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   29.276545] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   29.276625] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   29.276728] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   29.276807] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   29.276905] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   29.276997] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   29.277078] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   29.277163] ACPI: Power Resource [URP1] (off)
[   29.277186] ACPI: Power Resource [URP2] (off)
[   29.277207] ACPI: Power Resource [FDDP] (off)
[   29.277229] ACPI: Power Resource [LPTP] (off)
[   29.277237] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.277248] pnp: PnP ACPI init
[   29.277255] ACPI: bus type pnp registered
[   29.279492] pnp: PnP ACPI: found 12 devices
[   29.279495] ACPI: ACPI bus type pnp unregistered
[   29.279499] PnPBIOS: Disabled by ACPI PNP
[   29.279556] PCI: Using ACPI for IRQ routing
[   29.279559] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   29.282465] NET: Registered protocol family 8
[   29.282467] NET: Registered protocol family 20
[   29.282543] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[   29.282568] Time: tsc clocksource has been installed.
[   29.312806] PCI: Bridge: 0000:00:01.0
[   29.312808]   IO window: disabled.
[   29.312814]   MEM window: cdd00000-cfefffff
[   29.312819]   PREFETCH window: bda00000-cdbfffff
[   29.312840] NET: Registered protocol family 2
[   29.350543] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   29.350617] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[   29.350944] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   29.351177] TCP: Hash tables configured (established 16384 bind 16384)
[   29.351180] TCP reno registered
[   29.362583] checking if image is initramfs... it is
[   29.813849] Switched to high resolution mode on CPU 0
[   29.913530] Freeing initrd memory: 7059k freed
[   29.914033] audit: initializing netlink socket (disabled)
[   29.914050] audit(1200850450.956:1): initialized
[   29.915829] VFS: Disk quotas dquot_6.5.1
[   29.915876] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   29.915973] io scheduler noop registered
[   29.915976] io scheduler anticipatory registered
[   29.915978] io scheduler deadline registered
[   29.915991] io scheduler cfq registered (default)
[   29.916034] Boot video device is 0000:01:00.0
[   29.916187] isapnp: Scanning for PnP cards...
[   30.269065] isapnp: No Plug & Play device found
[   30.292843] Real Time Clock Driver v1.12ac
[   30.292944] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   30.293039] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.293690] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.294451] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   30.294690] input: Macintosh mouse button emulation as /class/input/input0
[   30.294768] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   30.295051] serio: i8042 KBD port at 0x60,0x64 irq 1
[   30.295056] serio: i8042 AUX port at 0x60,0x64 irq 12
[   30.295214] mice: PS/2 mouse device common for all mice
[   30.295328] EISA: Probing bus 0 at eisa.0
[   30.295364] EISA: Detected 0 cards.
[   30.295563] TCP cubic registered
[   30.295574] NET: Registered protocol family 1
[   30.295594] Using IPI No-Shortcut mode
[   30.295756]   Magic number: 8:304:593
[   30.296478] Freeing unused kernel memory: 364k freed
[   30.372054] input: AT Translated Set 2 keyboard as /class/input/input1
[   31.486551] AppArmor: AppArmor initialized<5>audit(1200850452.456:2):  type=1505 info="AppArmor initialized" pid=1178
[   31.494859] fuse init (API version 7.8)
[   31.499571] Failure registering capabilities with primary security module.
[   32.063332] SCSI subsystem initialized
[   32.067935] libata version 2.21 loaded.
[   32.070390] pata_sis 0000:00:02.5: version 0.5.1
[   32.070618] scsi0 : pata_sis
[   32.070673] scsi1 : pata_sis
[   32.070803] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14
[   32.070806] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
[   32.086243] usbcore: registered new interface driver usbfs
[   32.086275] usbcore: registered new interface driver hub
[   32.086299] usbcore: registered new device driver usb
[   32.134395] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   32.194930] sis900.c: v1.08.10 Apr. 2 2006
[   32.235722] ata1.00: Host Protected Area detected:
[   32.235725]  current size: 385394048 sectors
[   32.235726]  native size: 390721968 sectors
[   32.237568] ata1.00: native size increased to 390721968 sectors
[   32.237574] ata1.00: ATA-6: WDC WD2000BB-00GUA0, 08.02D08, max UDMA/100
[   32.237577] ata1.00: 390721968 sectors, multi 16: LBA48 
[   32.237589] ata1.00: limited to UDMA/33 due to 40-wire cable
[   32.251712] ata1.00: configured for UDMA/33
[   32.276031] Floppy drive(s): fd0 is 1.44M
[   32.293799] FDC 0 is a post-1991 82077
[   32.733625] ata2.00: ATAPI: ATAPI   DVD RW 8XMax, 130D, max UDMA/33
[   32.733633] ata2.01: ATAPI: CREATIVE DVD-ROM DVD1243E, IC01, max UDMA/33
[   32.905364] ata2.00: configured for UDMA/33
[   33.077106] ata2.01: configured for UDMA/33
[   33.077248] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2000BB-00G 08.0 PQ: 0 ANSI: 5
[   33.078166] scsi 1:0:0:0: CD-ROM            ATAPI    DVD RW 8XMax     130D PQ: 0 ANSI: 5
[   33.078727] scsi 1:0:1:0: CD-ROM            CREATIVE DVD-ROM DVD1243E IC01 PQ: 0 ANSI: 5
[   33.079102] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[   33.079117] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   33.079425] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   33.079445] ohci_hcd 0000:00:03.0: irq 16, io mem 0xcfffd000
[   33.098125] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[   33.098168] sd 0:0:0:0: [sda] Write Protect is off
[   33.098170] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.098196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.098272] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[   33.098281] sd 0:0:0:0: [sda] Write Protect is off
[   33.098284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.098298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.098303]  sda: sda1 sda2 <<6>usb usb1: configuration #1 chosen from 1 choice
[   33.135001] hub 1-0:1.0: USB hub found
[   33.135017] hub 1-0:1.0: 3 ports detected
[   33.138694]  sda5 >
[   33.139196] sd 0:0:0:0: [sda] Attached SCSI disk
[   33.143187] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   33.143212] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[   33.143232] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[   33.169754] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   33.169761] Uniform CD-ROM driver Revision: 3.20
[   33.170074] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   33.173294] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[   33.173448] sr 1:0:1:0: Attached scsi CD-ROM sr1
[   33.236834] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
[   33.236858] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   33.236896] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   33.236916] ohci_hcd 0000:00:03.1: irq 17, io mem 0xcfffe000
[   33.294706] usb usb2: configuration #1 chosen from 1 choice
[   33.294740] hub 2-0:1.0: USB hub found
[   33.294751] hub 2-0:1.0: 3 ports detected
[   33.393975] Attempting manual resume
[   33.393980] swsusp: Resume From Partition 8:5
[   33.393982] PM: Checking swsusp image.
[   33.394268] PM: Resume from disk failed.
[   33.396762] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
[   33.447617] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[cfffb800-cfffbfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   33.451747] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 19
[   33.451758] ehci_hcd 0000:00:03.2: EHCI Host Controller
[   33.451787] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[   33.451831] PCI: cache line size of 64 is not supported by device 0000:00:03.2
[   33.451838] ehci_hcd 0000:00:03.2: irq 19, io mem 0xcffff000
[   33.451847] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   33.451945] usb usb3: configuration #1 chosen from 1 choice
[   33.451975] hub 3-0:1.0: USB hub found
[   33.451986] hub 3-0:1.0: 6 ports detected
[   33.527559] kjournald starting.  Commit interval 5 seconds
[   33.527573] EXT3-fs: mounted filesystem with ordered data mode.
[   33.552453] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18
[   33.553329] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[   33.562064] 0000:00:04.0: Using transceiver found at address 1 as default
[   33.562697] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 18, 00:0b:6a:3b:a5:04.
[   33.971580] usb 3-2: new high speed USB device using ehci_hcd and address 2
[   34.103956] usb 3-2: configuration #1 chosen from 1 choice
[   34.104127] hub 3-2:1.0: USB hub found
[   34.104218] hub 3-2:1.0: 4 ports detected
[   34.447965] usb 3-4: new high speed USB device using ehci_hcd and address 3
[   34.682604] usb 3-4: configuration #1 chosen from 1 choice
[   34.718595] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00308d01000195b9]
[   34.882395] usb 3-2.3: new high speed USB device using ehci_hcd and address 4
[   34.975119] usb 3-2.3: configuration #1 chosen from 1 choice
[   35.173943] usb 3-2.4: new high speed USB device using ehci_hcd and address 5
[   35.266876] usb 3-2.4: configuration #1 chosen from 1 choice
[   41.813126] NET: Registered protocol family 17
[   41.971630] Linux agpgart interface v0.102 (c) Dave Jones
[   41.973401] agpgart: Detected SiS chipset - id:1862
[   41.977818] agpgart: AGP aperture is 64M @ 0xd0000000
[   41.991709] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   41.994379] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   42.252052] eth1: Media Link On 100mbps full-duplex 
[   42.310422] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   42.645652] nvidia: module license 'NVIDIA' taints kernel.
[   42.977106] input: PC Speaker as /class/input/input2
[   42.977246] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[   42.977724] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   43.376415] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[   43.379550] parport_pc 00:0a: reported by Plug and Play ACPI
[   43.379644] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   43.568258] usbcore: registered new interface driver libusual
[   43.600036] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   43.600044] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   43.613723] Initializing USB Mass Storage driver...
[   43.613836] scsi2 : SCSI emulation for USB Mass Storage devices
[   43.613910] usb-storage: device found at 3
[   43.613912] usb-storage: waiting for device to settle before scanning
[   43.613965] scsi3 : SCSI emulation for USB Mass Storage devices
[   43.614020] usb-storage: device found at 4
[   43.614022] usb-storage: waiting for device to settle before scanning
[   43.614037] usbcore: registered new interface driver usb-storage
[   43.614040] USB Mass Storage support registered.
[   43.690938] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D11
[   43.690957] usbcore: registered new interface driver usblp
[   43.690961] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[   43.915924] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21
[   44.236243] intel8x0_measure_ac97_clock: measured 55422 usecs
[   44.236247] intel8x0: clocking to 48000
[   44.973484] lp0: using parport0 (interrupt-driven).
[   45.016898] Adding 2265124k swap on /dev/sda5.  Priority:-1 extents:1 across:2265124k
[   45.267243] EXT3 FS on sda1, internal journal
[   45.688702] NET: Registered protocol family 10
[   45.688823] lo: Disabled Privacy Extensions
[   46.615215] No dock devices found.
[   46.684745] input: Power Button (FF) as /class/input/input4
[   46.689679] ACPI: Power Button (FF) [PWRF]
[   46.727548] input: Power Button (CM) as /class/input/input5
[   46.732444] ACPI: Power Button (CM) [PWRB]
[   48.128710] ppdev: user-space parallel port driver
[   48.465056] audit(1200850470.382:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4782 profile="/usr/sbin/cupsd"
[   48.606214] usb-storage: device scan complete
[   48.606333] usb-storage: device scan complete
[   48.606798] scsi 3:0:0:0: Direct-Access     HP                        1.00 PQ: 0 ANSI: 5
[   48.608398] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[   48.608447] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   48.641915] scsi 2:0:0:0: Direct-Access     SAMSUNG  HD400LD          WQ10 PQ: 0 ANSI: 0
[   48.672150] sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[   48.673181] sd 2:0:0:0: [sdc] Write Protect is off
[   48.673183] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[   48.673186] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[   48.677825] sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[   48.678671] sd 2:0:0:0: [sdc] Write Protect is off
[   48.678674] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[   48.678676] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[   48.678682]  sdc:<6>apm: BIOS not found.
[   49.058211] Failure registering capabilities with primary security module.
[   49.370793] Bluetooth: Core ver 2.11
[   49.371138] NET: Registered protocol family 31
[   49.371142] Bluetooth: HCI device and connection manager initialized
[   49.371146] Bluetooth: HCI socket layer initialized
[   49.503257] Bluetooth: L2CAP ver 2.8
[   49.503263] Bluetooth: L2CAP socket layer initialized
[   49.619067] Bluetooth: RFCOMM socket layer initialized
[   49.619372] Bluetooth: RFCOMM TTY layer initialized
[   49.619375] Bluetooth: RFCOMM ver 1.8
[   53.039823] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   53.039842] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   53.039913] agpgart: SiS delay workaround: giving bridge time to recover.
[   53.053511] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   55.894656] eth1: no IPv6 routers present
[   56.187089]  sdc1
[   56.187191] sd 2:0:0:0: [sdc] Attached SCSI disk
[   56.187248] sd 2:0:0:0: Attached scsi generic sg4 type 0
jim@jim-desktop:~$

Revision history for this message

naufal (musp-student) said on 2008-01-20:

Hello,
It's look like your harddrive is 'SAMSUNG HD400LD' with 40GB.
so you can try this command:
1:sudo mkdir /media/newvolume ( or name it as you want,but here I named it 'newvolume' )
2:sudo mount /dev/sdc /media/newvolume
Hope this helpfull..

Revision history for this message

Jim Edwards (jim-edwards) said on 2008-01-21:

naufal wrote:
> Your question #22620 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/22620
>
> Status: Open => Answered
>
> naufal proposed the following answer:
> Hello,
> It's look like your harddrive is 'SAMSUNG HD400LD' with 40GB.
> so you can try this command:
> 1:sudo mkdir /media/newvolume ( or name it as you want,but here I named it 'newvolume' )
> 2:sudo mount /dev/sdc /media/newvolume
> Hope this helpfull..
>

No good, I'm afraid. Came back no such file or directory. Sorry for
delay in responding as away from computer while I work as London taxi
driver during day!

Thanks anyway

Jim

Revision history for this message

naufal (musp-student) said on 2008-01-22:

Hello,
Connect your external harddrive to usb port and type in terminal 'lsusb'.
post the result here..
type in terminal 'dir /'
post the result here...

Revision history for this message

Jim Edwards (jim-edwards) said on 2008-01-23:

Hi Naufal

As requested:

jim@jim-desktop:~$ lsusb
Bus 003 Device 007: ID 03f0:5d11 Hewlett-Packard
Bus 003 Device 005: ID 1385:4251
Bus 003 Device 003: ID 07ab:fcfe Freecom Technologies
Bus 003 Device 002: ID 050d:0234 Belkin Components F5U234 USB 2.0 4-Port Hub
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
jim@jim-desktop:~$ dir /
bin cdrom etc initrd lib media opt root srv tmp var
boot dev home initrd.img lost+found mnt proc sbin sys usr vmlinuz
jim@jim-desktop:~$

As you see the device appears at Device 003 but still cant be accessed.

Thanks

Jim

Revision history for this message

naufal (musp-student) said on 2008-01-23:

Hello,
Disconnect the device,
try to install 'usbmount'
open System ---> Administration ---> Synaptic and search for 'usbmount' Look in:Name
hope this help..

Revision history for this message

Jim Edwards (jim-edwards) said on 2008-01-23:

Hi Naufal

Tried to install "usbmount" as requested but didn't seem to solve problem, however other synaptic packages "pmount" and "hal" were suggested as alternatives in the usbmount notes. I looked and pmount was not installed but hal was already there. pmount installed and FREECOM HDD now on desktop and files available. Fingers crossed that it stays there!

Many thanks for your assistance.

Cheers

Jim Edwards

To post a message you must log in.

Ask a question

Edit question

Ubuntu

Ubuntu 7.10 installation cannot see external hard drive.

Question information

Related bugs

Related FAQ:

Subscribers