Como instalar los controladores de mi tarjeta S3 Graphics ProSavage en Ubuntu
Quiero activar los efectos pero no puedo, pues no hay controladores de video. he provado hasta con Wine y opciones de terminal pero nada. Alguien tiene alguna solución a mi problema?
Question information
- Language:
- Spanish Edit question
- Status:
- Answered
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
inicia Ubuntu en "recovery mode":
1) apaga el computador completamente
2) Al inciar, oprime "ESC" para ingresar al menu "GRUB" (debes estar antento
a los mensajes de inicio que invitan a esta opción)
3) Una vez en el menú, escoje la opción de "recovery mode" de Ubuntu
(debería ser la 2a opción en el menú)
4) El "recovery mode" te dará 4 opciones enun menú texto azul de las cuales
la última se llama "Restore X configuration' o algo similar. Escoje esa
opción. La pantalla hará un par de "flash" y un breve mensaje de advertencia
(backup de configuración actual) aparecerá abajo. Al volver al menú, escoje
la opción "Continue boot normally" o similar.
No recuerdo el nombre exacto de opciones de menú pero debería poder
accederlas igual. Esto debería detectar de nuevo tu configuración. Avísanos
aquí si funciona ésta solución.
Suerte,
Fabian
2008/7/20 <email address hidden> <email address hidden>
> New question #39817 on Ubuntu:
> https:/
>
> Instaló bien, se veía el escritorio y todo bien, hoy mismo la tuve
> encendida un rato en Linux y funcionó todo, la apague, y al volverla a
> encender carga Ubuntu hasta donde sale la barra que se carga de color
> naranja... entonces aparecen unos renglones de comandos como los que salen
> cuando el sistema se está cerrando... aparecen y desaparecen dos veces y
> luego aparece una ventana que dice: Ubuntu tiene problemas para iniciar
> porque ha detectado una resolución muy baja en su pantalla o no detecta su
> tarjeta de video,puede elegir que siempre funcione con la configuración más
> baja o configurarla manualmente. y vienen varias opciones, predeterminar
> resolución baja... cerrar... configurar... continuar
> Una vez elegi continuar... no arrancó... se queda la pantalla en
> negro... otra vez elegí predeterminar resolución baja... no arrancó... lo
> mismo... la última vez elegí configurar, pero no sé cómo ... No me habìa
> dado problemas, porqué de pronto me los da??
>
> --
> You received this question notification because you are a member of
> Ubuntu-co-answers, which is an answer contact for Ubuntu.
>
Revision history for this message
|
#2 |
Fabian, hice lo que me indicaste y pude ingresar a Ubuntu, lamentablemente todos los objetos en la pantalla quedaron demasiado grandes y no puedo ver muchas de las opciones de la barra de menú... aparte el teclado no quedó configurado correctamente, no sé cómo arreglar esto, pero como te digo, no se puede accesar a todas las opciones del menú... y las ventanas cuando se abren no se pueden visualizar completas por lo mismo que están muy grandes... gracias.
Revision history for this message
|
#3 |
Qué tarjeta gráfica tiene tu pc? Al momento que lo averigues, postealo aca y podremos modificar el archivo /etc/X11/xorg.conf y así podremos arreglar la resolución. Primero, averigua que tarjeta de video tiene tu pc.
Revision history for this message
|
#4 |
Gabriel, si encontré el dato adecuado, la tarjeta de video dice: S3 Graphics ProSavage DDR
Revision history for this message
|
#5 |
Hola, intenta arrancando la maquina normalmente, cuando te de el error usa <Ctl><Alt>F1 alli haces login con tu usuario y tu clave, entonces prueba usar el comando:
$: sudo dpkg-reconfigure xserver-xorg
Sigue las instrucciones y entonces reinicia para ver que pasa.
Saludos,
Revision history for this message
|
#6 |
hola amigos tengo el mismo problema mi tarjeta de graficos es una ati readon xpres 1200 series por favor ayudenme ya e intentado instalar varios linux y nada estoy desesperado
Revision history for this message
|
#7 |
Por favor, abre otra pregunta para tu problema, javicreed.
Revision history for this message
|
#8 |
Tengo exactamente el mismo problema con una intel 945, por más que pruebo con las opciones de reconfigurar, crear nueva configuración gráfica, etc, siempre me anda en low graphics mode y se ve muy mal y con muy bajo rendimiento. Lo raro es que andaba bien y de un día para otro empezó a hacer esto y no se como arreglarlo, incluso he pedido ayuda en ubuntuforums.org pero nadie me ha respondido...
Revision history for this message
|
#9 |
Ejecuta en consola: sudo gedit /etc/X11/xorg.conf
Pega el contenido del mismo aqui
Seguramente por lo que lei que pusiste, como tu pantalla es 1440 x 900
(panoramica) no la reconoce porque estan asignado resoluciones 4:3
como la 1024x780 (no panoramicas)
Asi que si ves algo como
Modes "1280x1024" "1024x768"
Reemplazalo por las resoluciones que se adaptan a tu pantalla.
El día 20 de abril de 2009 16:14, Marcelo
<email address hidden> escribió:
> Question #39817 on Ubuntu changed:
> https:/
>
> Marcelo requested for more information:
> Tengo exactamente el mismo problema con una intel 945, por más que
> pruebo con las opciones de reconfigurar, crear nueva configuración
> gráfica, etc, siempre me anda en low graphics mode y se ve muy mal y con
> muy bajo rendimiento. Lo raro es que andaba bien y de un día para otro
> empezó a hacer esto y no se como arreglarlo, incluso he pedido ayuda en
> ubuntuforums.org pero nadie me ha respondido...
>
> http://
>
> --
> You received this question notification because you are an answer
> contact for Ubuntu.
>
Revision history for this message
|
#10 |
Mira mi /etc/X11/
marcelo@linux:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
marcelo@linux:~$
Revision history for this message
|
#11 |
Modifica el "section screen" con esto:
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
EndSection
Esto tiene que quedar bien encolumnado como estan las demas, con la tecla tab
Guardas el archivo y reinicias.
El día 21 de abril de 2009 15:49, Marcelo
<email address hidden> escribió:
> Question #39817 on Ubuntu changed:
> https:/
>
> Marcelo requested for more information:
> Mira mi /etc/X11/
>
>
> marcelo@linux:~$ cat /etc/X11/xorg.conf
> # xorg.conf (X.Org X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool, using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the xorg.conf manual page.
> # (Type "man xorg.conf" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xorg package upgrades *only*
> # if it has not been modified since the last upgrade of the xserver-xorg
> # package.
> #
> # Note that some configuration settings that could be done previously
> # in this file, now are automatically configured by the server and settings
> # here are ignored.
> #
> # If you have edited this file but would like it to be automatically updated
> # again, run the following command:
> # sudo dpkg-reconfigure -phigh xserver-xorg
>
> Section "Device"
> Identifier "Configured Video Device"
> Option "UseFBDev" "true"
> EndSection
>
> Section "Monitor"
> Identifier "Configured Monitor"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Monitor "Configured Monitor"
> Device "Configured Video Device"
> EndSection
> marcelo@linux:~$
>
> --
> You received this question notification because you are an answer
> contact for Ubuntu.
>
Revision history for this message
|
#12 |
marcelo@linux:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Video Device"
Device "Configured Monitor"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900"
EndSection
marcelo@linux:~$
Lamentablemente no ha funcionado, pasa siempre lo mismo y termino en low graphics mode
Revision history for this message
|
#13 |
hola
puedo observar que en Section "Device" aparece la opcion de "UseFBDev" "true" aunque no estoy muy documentado sobre el tema parece ser que esta configuracion presenta problemas por que no intentas ponerla en false a ver que pasa o sino comentala que mas o menos te quede asi (aunque ahi te pongo mas datos que no se por que no estan, y bueno tampoco conosco que distro usas)
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
intenta ponerlo que quede de esa forma sino funciona podrias pegar la salida de de este comando , aunque antes deberias revisar sino presenta algun warning o error
cat /var/log/
ó less /varlog/
Saludos si algo nos comentas
PD: intente mandar esto desde el correo pero no aparecio, si ya te habia llegado por favor no tener encuenta.... gracias
Can you help with this problem?
Provide an answer of your own, or ask patyvoltind@hotmail.com for more information if necessary.