Wireless in Inspiron 5100 does not work. HELP!
Hello, following is the config...
1. Inspiron 5100 - no wireless switch.
2. On in the BIOS settings
3. Works with Win 7
4. Running 11.04
Wireless does not work.
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Hi,
Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1:
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
So the methods in Unity are:
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2: Please copy-paste the following command from https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
Revision history for this message
|
#2 |
yushrajkapoor@
[sudo] password for yushrajkapoor:
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded.
*-network:0
description: Ethernet interface
product: BCM4401 100Base-T
vendor: Broadcom Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth0
version: 01
serial: 00:0d:56:3b:3c:56
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
resources: irq:7 memory:
*-network:1
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 2
bus info: pci@0000:02:02.0
version: 02
width: 32 bits
clock: 33MHz
resources: irq:11 memory:
*-network DISABLED
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:90:4b:19:5d:82
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation 82845G/
00:01.0 PCI bridge [0604]: Intel Corporation 82845G/
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] [1002:4c57]
02:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T [14e4:4401] (rev 01)
02:02.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02)
02:04.0 CardBus bridge [0607]: Texas Instruments PCI4510 PC card Cardbus Controller [104c:ac44] (rev 02)
02:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI4510 IEEE-1394 Controller [104c:8029]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
PCI (sysfs)
H/W path Device Class Description
=======
/0 bus Motherboard
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Pentium(R) 4 CPU 2.40GHz
/0/400/700 memory 8KiB L1 cache
/0/400/701 memory 512KiB L2 cache
/0/1000 memory 768MiB System Memory
/0/1000/0 memory 256MiB DIMM DDR Synchronous 266 MHz (3.8 ns)
/0/1000/1 memory 512MiB DIMM DDR Synchronous 266 MHz (3.8 ns)
/0/100 bridge 82845G/
/0/100/1 bridge 82845G/
/0/100/1/0 display Radeon Mobility M7 LW [Radeon Mobility 7500]
/0/100/1d bus 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1d.1 bus 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1d.2 bus 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1d.7 bus 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
/0/100/1e bridge 82801 PCI Bridge
/0/100/1e/1 eth0 network BCM4401 100Base-T
/0/100/1e/2 network BCM4306 802.11b/g Wireless LAN Controller
/0/100/1e/4 bridge PCI4510 PC card Cardbus Controller
/0/100/1e/4.1 bus PCI4510 IEEE-1394 Controller
/0/100/1f bridge 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge
/0/100/1f.1 scsi0 storage 82801DB (ICH4) IDE Controller
/0/100/1f.1/0 /dev/cdrom disk CDRW/DVD SBW-242
/0/100/1f.1/1 /dev/sda disk 80GB ST980815A
/0/100/1f.1/1/1 /dev/sda1 volume 74GiB Windows NTFS volume
/0/100/1f.5 multimedia 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1f.6 communication 82801DB/DBL/DBM (ICH4/ICH4-
/1 power DELL D0093
/2 wlan0 network Wireless interface
Linux ubuntu 2.6.38-11-generic #49-Ubuntu SMP Mon Aug 29 20:47:58 UTC 2011 i686 i686 i386 GNU/Linux
[ 0.000000] APIC: switched to apic NOOP
[ 0.005406] SMP alternatives: switching to UP code
[ 0.101644] ACPI: No dock devices found.
[ 0.101650] HEST: Table not found.
[ 0.113160] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.113166] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.124554] usbcore: registered new interface driver usbfs
[ 0.124574] usbcore: registered new interface driver hub
[ 0.124618] usbcore: registered new device driver usb
[ 0.125188] Switching to clocksource pit
[ 0.146219] pnp: PnP ACPI: found 11 devices
[ 0.183957] Switching to clocksource acpi_pm
[ 0.186879] Switched to NOHz mode on CPU #0
[ 0.238340] input: Lid Switch as /devices/
[ 0.238713] ACPI: Lid Switch [LID]
[ 0.256191] ERST: Table is not found!
[ 0.339780] i2c-core: driver [adp5520] using legacy suspend method
[ 0.339783] i2c-core: driver [adp5520] using legacy resume method
[ 0.380700] hub 1-0:1.0: USB hub found
[ 0.381321] hub 2-0:1.0: USB hub found
[ 0.381968] hub 3-0:1.0: USB hub found
[ 0.382555] hub 4-0:1.0: USB hub found
[ 0.480242] device-mapper: multipath: version 1.2.0 loaded
[ 0.480250] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.482754] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.851843] isapnp: No Plug & Play device found
[ 1.200144] Switching to clocksource tsc
[ 1.516827] b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.516874] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
[ 1.516883] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 1.516890] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
[ 1.516898] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 1.516905] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
[ 1.516912] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 1.561400] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 1.597230] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[ 1.597241] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 1.597248] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[ 1.644263] ssb: Sonics Silicon Backplane found on PCI device 0000:02:01.0
[ 1.665252] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:3b:3c:56
[ 21.340632] lp: driver loaded but no devices found
[ 21.959093] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 22.828151] yenta_cardbus 0000:02:04.0: CardBus bridge found [1028:0149]
[ 23.893452] b43legacy-phy0: Broadcom 4306 WLAN found
[ 23.916035] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
[ 23.916059] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 23.940068] b43legacy-phy0 debug: Radio initialized
[ 24.011891] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
[ 24.548517] Console: switching to colour frame buffer device 128x48
[ 27.451405] ADDRCONF(
[ 27.891314] b43legacy-phy0 ERROR: Firmware file "b43legacy/
[ 27.891323] b43legacy-phy0 ERROR: You must go to http://
[ 30.816236] b44 ssb1:0: eth0: Link is up at 100 Mbps, full duplex
[ 30.816243] b44 ssb1:0: eth0: Flow control is off for TX and off for RX
[ 30.816511] ADDRCONF(
[ 41.824051] eth0: no IPv6 routers present
Manufacturer: Dell Computer Corporation
Product Name: Inspiron 5100
Manufacturer: Dell Computer Corporation
Product Name:
Manufacturer: Dell Computer Corporation
Manufacturer: Intel
Manufacturer: Not Specified
Manufacturer: Not Specified
Manufacturer: Panasonic
SBDS Manufacture Date: 2003-09-15
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
> hal.1: read hal dataprocess 2061: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
20: PCI 201.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.XxRvaJkOm82
Parent ID: 6NW+.ccU5FZC1tz2
SysFS ID: /devices/
SysFS BusID: 0000:02:01.0
Hardware Class: network
Model: "Broadcom BCM4401 100Base-T"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4401 "BCM4401 100Base-T"
SubVendor: pci 0x4401
SubDevice: pci 0x1028
Revision: 0x01
Driver: "b44"
Driver Modules: "ssb", "b44"
Device File: eth0
Memory Range: 0xfaffe000-
Memory Range: 0xfb000000-
IRQ: 7 (9805 events)
HW Address: 00:0d:56:3b:3c:56
Link detected: yes
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: b44 is active
Driver Activation Cmd: "modprobe b44"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
21: PCI 202.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.METla+0xbK4
Parent ID: 6NW+.ccU5FZC1tz2
SysFS ID: /devices/
SysFS BusID: 0000:02:02.0
Hardware Class: network
Model: "Dell TrueMobile 1300 WLAN Mini-PCI Card"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0001 "TrueMobile 1300 WLAN Mini-PCI Card"
Revision: 0x02
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Device File: wlan0
Features: WLAN
Memory Range: 0xfaffc000-
IRQ: 11 (926 events)
HW Address: 00:90:4b:19:5d:82
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 686 0.0 0.5 25448 4244 ? Ssl 13:02 0:00 NetworkManager
root 1126 0.0 0.1 2552 856 ? S 13:02 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
1000 2075 0.0 0.1 4148 840 pts/0 S+ 13:12 0:00 egrep --color=auto icd|etwork
Module Size Used by
binfmt_misc 13213 1
parport_pc 32111 0
ppdev 12849 0
snd_intel8x0 33213 2
radeon 900494 2
snd_ac97_codec 105614 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80042 2 snd_intel8x0,
arc4 12473 2
ttm 65184 1 radeon
snd_seq_midi 13132 0
b43legacy 127415 0
snd_rawmidi 25269 1 snd_seq_midi
drm_kms_helper 40745 1 radeon
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_
mac80211 257001 1 b43legacy
joydev 17322 0
snd_timer 28659 2 snd_pcm,snd_seq
pcmcia 39671 0
snd_seq_device 14110 3 snd_seq_
drm 184164 4 radeon,
dcdbas 14054 0
cfg80211 156212 2 b43legacy,mac80211
yenta_socket 27230 0
snd 55295 11 snd_intel8x0,
pcmcia_rsrc 18292 1 yenta_socket
pcmcia_core 21505 3 pcmcia,
i2c_algo_bit 13184 1 radeon
psmouse 73312 0
soundcore 12600 1 snd
serio_raw 12990 0
snd_page_alloc 14073 2 snd_intel8x0,
shpchp 32345 0
video 18951 0
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
b44 35301 0
firewire_ohci 31504 0
ssb 45942 2 b43legacy,b44
firewire_core 56138 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
yushrajkapoor@
yushrajkapoor@
yushrajkapoor@
yushrajkapoor@
yushrajkapoor@
Revision history for this message
|
#3 |
Here's another run...
yushrajkapoor@
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded.
*-network:0
description: Ethernet interface
product: BCM4401 100Base-T
vendor: Broadcom Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth0
version: 01
serial: 00:0d:56:3b:3c:56
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
resources: irq:7 memory:
*-network:1
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 2
bus info: pci@0000:02:02.0
version: 02
width: 32 bits
clock: 33MHz
resources: irq:11 memory:
*-network DISABLED
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:90:4b:19:5d:82
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation 82845G/
00:01.0 PCI bridge [0604]: Intel Corporation 82845G/
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] [1002:4c57]
02:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T [14e4:4401] (rev 01)
02:02.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02)
02:04.0 CardBus bridge [0607]: Texas Instruments PCI4510 PC card Cardbus Controller [104c:ac44] (rev 02)
02:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI4510 IEEE-1394 Controller [104c:8029]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus Motherboard
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Pentium(R) 4 CPU 2.40GHz
/0/400/700 memory 8KiB L1 cache
/0/400/701 memory 512KiB L2 cache
/0/1000 memory 768MiB System Memory
/0/1000/0 memory 256MiB DIMM DDR Synchronous 266 MHz (3.8 ns)
/0/1000/1 memory 512MiB DIMM DDR Synchronous 266 MHz (3.8 ns)
/0/100 bridge 82845G/
/0/100/1 bridge 82845G/
/0/100/1/0 display Radeon Mobility M7 LW [Radeon Mobility 7500]
/0/100/1d bus 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1d.1 bus 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1d.2 bus 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1d.7 bus 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
/0/100/1e bridge 82801 PCI Bridge
/0/100/1e/1 eth0 network BCM4401 100Base-T
/0/100/1e/2 network BCM4306 802.11b/g Wireless LAN Controller
/0/100/1e/4 bridge PCI4510 PC card Cardbus Controller
/0/100/1e/4.1 bus PCI4510 IEEE-1394 Controller
/0/100/1f bridge 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge
/0/100/1f.1 scsi0 storage 82801DB (ICH4) IDE Controller
/0/100/1f.1/0 /dev/cdrom disk CDRW/DVD SBW-242
/0/100/1f.1/1 /dev/sda disk 80GB ST980815A
/0/100/1f.1/1/1 /dev/sda1 volume 74GiB Windows NTFS volume
/0/100/1f.5 multimedia 82801DB/DBL/DBM (ICH4/ICH4-
/0/100/1f.6 communication 82801DB/DBL/DBM (ICH4/ICH4-
/1 power DELL D0093
/2 wlan0 network Wireless interface
Linux ubuntu 2.6.38-11-generic #49-Ubuntu SMP Mon Aug 29 20:47:58 UTC 2011 i686 i686 i386 GNU/Linux
[ 0.000000] APIC: switched to apic NOOP
[ 0.005406] SMP alternatives: switching to UP code
[ 0.101644] ACPI: No dock devices found.
[ 0.101650] HEST: Table not found.
[ 0.113160] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.113166] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.124554] usbcore: registered new interface driver usbfs
[ 0.124574] usbcore: registered new interface driver hub
[ 0.124618] usbcore: registered new device driver usb
[ 0.125188] Switching to clocksource pit
[ 0.146219] pnp: PnP ACPI: found 11 devices
[ 0.183957] Switching to clocksource acpi_pm
[ 0.186879] Switched to NOHz mode on CPU #0
[ 0.238340] input: Lid Switch as /devices/
[ 0.238713] ACPI: Lid Switch [LID]
[ 0.256191] ERST: Table is not found!
[ 0.339780] i2c-core: driver [adp5520] using legacy suspend method
[ 0.339783] i2c-core: driver [adp5520] using legacy resume method
[ 0.380700] hub 1-0:1.0: USB hub found
[ 0.381321] hub 2-0:1.0: USB hub found
[ 0.381968] hub 3-0:1.0: USB hub found
[ 0.382555] hub 4-0:1.0: USB hub found
[ 0.480242] device-mapper: multipath: version 1.2.0 loaded
[ 0.480250] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.482754] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.851843] isapnp: No Plug & Play device found
[ 1.200144] Switching to clocksource tsc
[ 1.516827] b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.516874] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
[ 1.516883] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 1.516890] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
[ 1.516898] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 1.516905] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
[ 1.516912] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 1.561400] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 1.597230] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[ 1.597241] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 1.597248] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[ 1.644263] ssb: Sonics Silicon Backplane found on PCI device 0000:02:01.0
[ 1.665252] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:3b:3c:56
[ 21.340632] lp: driver loaded but no devices found
[ 21.959093] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 22.828151] yenta_cardbus 0000:02:04.0: CardBus bridge found [1028:0149]
[ 23.893452] b43legacy-phy0: Broadcom 4306 WLAN found
[ 23.916035] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
[ 23.916059] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 23.940068] b43legacy-phy0 debug: Radio initialized
[ 24.011891] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
[ 24.548517] Console: switching to colour frame buffer device 128x48
[ 27.451405] ADDRCONF(
[ 27.891314] b43legacy-phy0 ERROR: Firmware file "b43legacy/
[ 27.891323] b43legacy-phy0 ERROR: You must go to http://
[ 30.816236] b44 ssb1:0: eth0: Link is up at 100 Mbps, full duplex
[ 30.816243] b44 ssb1:0: eth0: Flow control is off for TX and off for RX
[ 30.816511] ADDRCONF(
[ 41.824051] eth0: no IPv6 routers present
Manufacturer: Dell Computer Corporation
Product Name: Inspiron 5100
Manufacturer: Dell Computer Corporation
Product Name:
Manufacturer: Dell Computer Corporation
Manufacturer: Intel
Manufacturer: Not Specified
Manufacturer: Not Specified
Manufacturer: Panasonic
SBDS Manufacture Date: 2003-09-15
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
> hal.1: read hal dataprocess 2174: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
20: PCI 201.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.XxRvaJkOm82
Parent ID: 6NW+.ccU5FZC1tz2
SysFS ID: /devices/
SysFS BusID: 0000:02:01.0
Hardware Class: network
Model: "Broadcom BCM4401 100Base-T"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4401 "BCM4401 100Base-T"
SubVendor: pci 0x4401
SubDevice: pci 0x1028
Revision: 0x01
Driver: "b44"
Driver Modules: "ssb", "b44"
Device File: eth0
Memory Range: 0xfaffe000-
Memory Range: 0xfb000000-
IRQ: 7 (10984 events)
HW Address: 00:0d:56:3b:3c:56
Link detected: yes
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: b44 is active
Driver Activation Cmd: "modprobe b44"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
21: PCI 202.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.METla+0xbK4
Parent ID: 6NW+.ccU5FZC1tz2
SysFS ID: /devices/
SysFS BusID: 0000:02:02.0
Hardware Class: network
Model: "Dell TrueMobile 1300 WLAN Mini-PCI Card"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0001 "TrueMobile 1300 WLAN Mini-PCI Card"
Revision: 0x02
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Device File: wlan0
Features: WLAN
Memory Range: 0xfaffc000-
IRQ: 11 (929 events)
HW Address: 00:90:4b:19:5d:82
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 686 0.0 0.5 25448 4240 ? Ssl 13:02 0:00 NetworkManager
root 1126 0.0 0.1 2552 856 ? S 13:02 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
1000 2188 0.0 0.1 4148 840 pts/0 S+ 13:15 0:00 egrep --color=auto icd|etwork
Module Size Used by
binfmt_misc 13213 1
parport_pc 32111 0
ppdev 12849 0
snd_intel8x0 33213 2
radeon 900494 2
snd_ac97_codec 105614 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80042 2 snd_intel8x0,
arc4 12473 2
ttm 65184 1 radeon
snd_seq_midi 13132 0
b43legacy 127415 0
snd_rawmidi 25269 1 snd_seq_midi
drm_kms_helper 40745 1 radeon
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_
mac80211 257001 1 b43legacy
joydev 17322 0
snd_timer 28659 2 snd_pcm,snd_seq
pcmcia 39671 0
snd_seq_device 14110 3 snd_seq_
drm 184164 4 radeon,
dcdbas 14054 0
cfg80211 156212 2 b43legacy,mac80211
yenta_socket 27230 0
snd 55295 11 snd_intel8x0,
pcmcia_rsrc 18292 1 yenta_socket
pcmcia_core 21505 3 pcmcia,
i2c_algo_bit 13184 1 radeon
psmouse 73312 0
soundcore 12600 1 snd
serio_raw 12990 0
snd_page_alloc 14073 2 snd_intel8x0,
shpchp 32345 0
video 18951 0
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
b44 35301 0
firewire_ohci 31504 0
ssb 45942 2 b43legacy,b44
firewire_core 56138 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
yushrajkapoor@
Revision history for this message
|
#4 |
Please proceed with the following commands:
sudo apt-get update
sudo apt-get install b43-fwcutter firmware-
b43-fwcutter exists in the Ubuntu repositories, but you will need a
working wired Internet connection in Ubuntu in order to locate it and
install it.
The only way to do that - in your case - is to connect the pc to the
wireless router using a LAN cable, instead of using wireless.
Then reboot your PC and run the following command:
sudo rfkill unblock all
Then retest wireless.
Hope it helps.
Revision history for this message
|
#5 |
I get an error. Pasting terminal dump below...
yushrajkapoor@
[sudo] password for yushrajkapoor:
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Get:1 http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Fetched 72 B in 7s (10 B/s)
Reading package lists... Done
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
b43-fwcutter is already the newest version.
firmware-
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Setting up firmware-
Not supported card here (PCI id 14e4:4401
14e4:4320)!
Use b43 firmware. This is just for the b43legacy driver.
Aborting.
dpkg: error processing firmware-
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
firmware-
E: Sub-process /usr/bin/dpkg returned an error code (1)
yushrajkapoor@
Revision history for this message
|
#6 |
Try this...
sudo apt-get -f install
sudo apt-get --fix-missing install
sudo apt-get purge b43-fwcutter firmware-
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo apt-get autoclean
sudo apt-get clean
sudo apt-get upgrade
sudo apt-get --reinstall install b43-fwcutter firmware-
Revision history for this message
|
#7 |
Better i made an error in command...
Try this...
sudo apt-get -f install
sudo apt-get --fix-missing install
sudo apt-get purge b43-fwcutter firmware-
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo apt-get autoclean
sudo apt-get clean
sudo apt-get update
sudo apt-get --reinstall install b43-fwcutter firmware-
Revision history for this message
|
#8 |
I get an error in the very first command... but I continue to execute all commands just to see what happens... pasting log on the terminal below...
yushrajkapoor@
[sudo] password for yushrajkapoor:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up firmware-
Not supported card here (PCI id 14e4:4401
14e4:4320)!
Use b43 firmware. This is just for the b43legacy driver.
Aborting.
dpkg: error processing firmware-
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
firmware-
E: Sub-process /usr/bin/dpkg returned an error code (1)
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up firmware-
Not supported card here (PCI id 14e4:4401
14e4:4320)!
Use b43 firmware. This is just for the b43legacy driver.
Aborting.
dpkg: error processing firmware-
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
firmware-
E: Sub-process /usr/bin/dpkg returned an error code (1)
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
b43-fwcutter* firmware-
0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 180 kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 158149 files and directories currently installed.)
Removing firmware-
Purging configuration files for firmware-
Removing firmware-
Deleting old extracted firmware...
Purging configuration files for firmware-
Removing b43-fwcutter ...
Processing triggers for man-db ...
yushrajkapoor@
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
Del libcupscgi1 1.4.6-5ubuntu1.3 [35.6 kB]
Del cups 1.4.6-5ubuntu1.3 [1,963 kB]
Del libcupsmime1 1.4.6-5ubuntu1.3 [18.6 kB]
Del grub-gfxpayload
Del libcupsppdc1 1.4.6-5ubuntu1.3 [60.8 kB]
Del cups-common 1.4.6-5ubuntu1.3 [1,275 kB]
Del libcupsimage2 1.4.6-5ubuntu1.3 [54.7 kB]
Del libcupsdriver1 1.4.6-5ubuntu1.3 [24.7 kB]
Del linux-libc-dev 2.6.38-11.49 [805 kB]
Del cups-bsd 1.4.6-5ubuntu1.3 [44.5 kB]
Del libcups2 1.4.6-5ubuntu1.3 [158 kB]
Del linux-headers-
Del linux-headers-
Del cups-ppdc 1.4.6-5ubuntu1.3 [34.4 kB]
Del cups-client 1.4.6-5ubuntu1.3 [126 kB]
Del linux-image-
yushrajkapoor@
yushrajkapoor@
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package b43-fecutter
yushrajkapoor@
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
b43-fwcutter firmware-
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.1 kB of archives.
After this operation, 131 kB of additional disk space will be used.
Get:1 http://
Get:2 http://
Fetched 18.1 kB in 0s (25.4 kB/s)
Selecting previously deselected package b43-fwcutter.
(Reading database ... 158135 files and directories currently installed.)
Unpacking b43-fwcutter (from .../b43-
Selecting previously deselected package firmware-
Unpacking firmware-
Processing triggers for man-db ...
Setting up b43-fwcutter (1:013-3) ...
Setting up firmware-
Not supported card here (PCI id 14e4:4401
14e4:4320)!
Use b43 firmware. This is just for the b43legacy driver.
Aborting.
dpkg: error processing firmware-
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
firmware-
E: Sub-process /usr/bin/dpkg returned an error code (1)
yushrajkapoor@
Revision history for this message
|
#9 |
Revision history for this message
|
#10 |
Revision history for this message
|
#11 |
Read the post MasterNetra (designerkline) wrote on 2011-04-27:
into the bug link https:/
Revision history for this message
|
#12 |
thanks marcobra, however, that is way too confusing to me to decipher...
Revision history for this message
|
#13 |
For the convenience of others, the instructions in question are at https:/
The information you have provided us indicates that you are using the i386 (32-bit PC or 32-bit Intel Mac) version of Ubuntu, so the specific .deb package from http://
If you don't have the Synaptic Package Manager installed, you can install it in the Software Center -- it is itself provided by the package: synaptic.
After synaptic is installed, quit any other package management utilities (including the Software Center), run Synaptic, remove the currently installed bcmwl-kernel-source package (use "Mark for Complete Removal"), then install the .deb package downloaded from the above link.
Then follow the rest of MasterNetra's instructions, which I have reproduced here for your convenience and that of others. (This is only a minority portion of his post, and I am guessing nobody will mind me reposting it under these circumstances.)
"After thats installed, go back into synaptic, find bcmwl-kernel-source again and this time, select it, and goto "Package > Lock Version" to prevent it being upgraded back to the broken natty version. After all that, restart your computer and it should be working again."
Can you help with this problem?
Provide an answer of your own, or ask Raj Kapoor for more information if necessary.